<br />
<b>Warning</b>:  Use of undefined constant wp_title - assumed 'wp_title' (this will throw an Error in a future version of PHP) in <b>/www/wwwroot/songjiangjituan.com/wp-content/themes/onii/header-pc.php</b> on line <b>27</b><br />

沖床CASE SHOW

STRM型穩定橡膠減振器“C型沖床首先”

服務內容:STRM型穩定橡膠減振器“C型沖床首先”

簡介:STRM型穩定橡膠減振器“C型沖床首先” STRM type stabilized rubber shock absorber 上海淞江減震器集團有限公司官方網站為您介紹:STRM型穩定橡膠減振器“C型沖床首先”信息,淞江集團為眾多沖床提供減震降噪解......

STRM型穩定橡膠減振器“C型沖床首先”
STRM type stabilized rubber shock absorber

上海淞江減震器集團有限公司官方網站為您介紹:STRM型穩定橡膠減振器“C型沖床首先”信息,淞江集團為眾多沖床提供減震降噪解決方案,以下是為C型沖床提供減震器,效果好。

STRM型穩定橡膠減振器“C型沖床首先”

官方承諾 Official promise
橡膠主材:NR/NBR/CR復合材料;
使用壽命:5年以上(無油情況下)
五年質保:室內使用最高可以質保5年
減振效果:使用前后對比可達70%
支持檢測:安裝前后支持效果檢測(第三方)
問題賠付:如有質量問題,退還全部貨款,并承擔拆裝費和運費;
Main rubber material: NR/NBR/CR composite material;
Service life: more than 5 years (without oil)
Five-year warranty: indoor use can be guaranteed for up to 5 years
Shock absorption effect: up to 70% before and after use
Support detection: support effect detection before and after installation (third party)
Compensation for problems: If there is a quality problem, the full payment will be refunded, and the disassembly and assembly fees and freight will be borne;

STRM型穩定橡膠減振器“C型沖床首先”
STRM型穩定橡膠減振器“C型沖床首先”

特性 characteristic:
1、有效的隔絕設備沖擊振動,防振效果極佳;
2、安裝后機械設備晃動少,能保持機械設備穩定性;
3、能調節高度,保持設備水平;
4、安裝簡單方便,無需惰性基礎;
5、采用特殊橡膠材質,耐用性強結構堅固耐用;
6、對于放置高樓層設備也能適用減振80%以上;
7、對減振要求較高的設備能高效減振;
1. Effectively isolate the shock and vibration of the equipment, and the anti-vibration effect is excellent;
2. The mechanical equipment shakes less after installation, which can maintain the stability of the mechanical equipment;
3. It can adjust the height and keep the equipment level;
4. The installation is simple and convenient, without inert foundation;
5. The use of special rubber material, strong durability, strong and durable structure;
6. It can also apply shock absorption of more than 80% for high-floor equipment;
7. Equipment with high shock absorption requirements can efficiently reduce shock;

主要用途The main purpose:
1、35-300tons C型沖床;
2、曲柄、無曲柄、液壓、氣壓沖床;
3、剪床、折床、大型裁斷機;
4、高樓層使用設備;
5、慢速沖床、鍛壓沖床、折彎機;10噸以上,重量大的,速度慢的設備,要求穩定性高的,不允許有擺動的,可以選擇該款減振器;
1. 35-300tons C-type punch;
2. Crank, non-crank, hydraulic and pneumatic punch press;
3. Shearing machine, folding machine, large cutting machine;
4. Equipment used on high floors;
5. Slow-speed punches, forging presses, bending machines; more than 10 tons, heavy, slow-speed equipment, which requires high stability, and does not allow swinging, you can choose this type of shock absorber;

STRM型穩定橡膠減振器“C型沖床首先”
STRM型穩定橡膠減振器“C型沖床首先”

相關鏈接:KQJZ-1200-A沖床空氣減震器

 

原創文章如轉載,請注明本文鏈接: http://www.dd6666.net/1439.html    瀏覽:2,054


最新推薦:
  • ·DN100x80國標變徑橡膠軟接頭“直連供暖機組”
  • ·出口緬甸一批不銹鋼法蘭橡膠接頭
  • ·全自動橡膠接頭硫化機陸續進廠“響應國家2025智能制造”
  • ·DN250給水管道波紋管補償器
  • ·【質量與控制】QT450球墨法蘭輕松通過20噸壓力檢測
  • ·【建德浙西數據中心項目】橡膠接頭合同
  • ·【調價通知函】上海淞江集團橡膠接頭、彈簧減震器一起漲價
  • ·【浙江東邦藥業】四氟橡膠接頭合同
  • ·泳池水質常用處理方法介紹
  • ·歡迎如東縣各級領導到我廠視察指導工作
  • 最好看的2019中文字幕